Author Topic: Needs Work  (Read 1243 times)

Offline Seabee

  • A's Best Friend
  • ***
  • Join Date: May 2011
  • Posts: 153
  • Karma: 2
  • 1957 Road Rocket
Re: Needs Work
« Reply #30 on: 04.10. 2020 01:45 »
Looks great! I've always wondered what the advantage was to the pipes outside the engine cases. Heat reduction or cornering clearance?
Good Advice
0
No reactions
1961 Super Rocket
1957 Road Rocket
2009 Harley Electra Glide Classic
1993 Harley Springer Softtail
1970 Harley Sportster Chopper
1957 Harley Panhead Chopper
1982 Yamaha XT550
2001 KTM EXC 400
1970 Honda CT70
Southern Illinois, USA

Offline Triton Thrasher

  • Scotland
  • Wise & Enlightened
  • *
  • Join Date: Feb 2009
  • Posts: 1548
  • Karma: 20
Re: Needs Work
« Reply #31 on: 04.10. 2020 09:53 »
I've always wondered what the advantage was to the pipes outside the engine cases.

They wouldn’t fit inside.
Good Advice
0
No reactions

Offline Doomtrainbarx

  • A's Best Friend
  • ***
  • Join Date: Jun 2020
  • Posts: 30
  • Karma: 0
    • Soundclick
Re: Needs Work
« Reply #32 on: 17.10. 2020 21:38 »
The bike is now complete with speedo and tacho which surprisingly are both working.
Took it for it's first run today - just a few miles locally and all seems fine
I was surprised just how fast these bike are and it vibrates less than my old FXR Harley that I've had from new !
Good Advice
0
No reactions

Offline Doomtrainbarx

  • A's Best Friend
  • ***
  • Join Date: Jun 2020
  • Posts: 30
  • Karma: 0
    • Soundclick
Re: Needs Work
« Reply #33 on: 17.10. 2020 21:51 »
The finished article - (if it ever is)
Good Advice
0
No reactions

Online KiwiGF

  • Last had an A10 in 1976, in 2011 it was time for my 2nd one. It was the project from HELL (but I learned a lot....)
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 1507
  • Karma: 13
Re: Needs Work
« Reply #34 on: 18.10. 2020 04:59 »
Looks great! I've always wondered what the advantage was to the pipes outside the engine cases. Heat reduction or cornering clearance?

Nothing more than a “style” thing i guess, it was cool 😁
Good Advice
0
No reactions
New Zealand

1956 A10 Golden Flash (1st finished project)

1949 B31 rigid “400cc hot rod” (2nd finished project, + favourite bike)

GL1800 Goldwing, well, the wife likes it

KTM 950 ADV, cos it’s 100% nuts

1952 Armstrong Siddeley Whitley for rainy days (with wife)

Online Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 6433
  • Karma: 36
Re: Needs Work
« Reply #35 on: 18.10. 2020 09:39 »
The finished article - (if it ever is)
Wow!
Good Advice
0
No reactions

Offline RDfella

  • Wise & Enlightened
  • *
  • Join Date: Aug 2017
  • Posts: 1011
  • Karma: 8
Re: Needs Work
« Reply #36 on: 18.10. 2020 11:39 »
Excellent work. Only niggle I have is the choice of rear tyre. I wouldn't lean it over too far.
Good Advice
0
No reactions
'49 B31, '49 M21, '53 DOT, '58 Flash, '00 Firestorm, Weslake sprint bike.

Online berger

  • Wise & Enlightened
  • *
  • Join Date: Nov 2017
  • Posts: 1339
  • Karma: 7
  • keith.chesterfield uk 500sscafe.norbsa project
Re: Needs Work
« Reply #37 on: 18.10. 2020 14:48 »
rd fella my claim to fame as a young en was wearing down the sides on one of those tyres on the starfire. my mates always pointed at it with disbelief , I was fearless back then or just young and crackers!
Good Advice
0
No reactions

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8478
  • Karma: 111
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Needs Work
« Reply #38 on: 18.10. 2020 19:20 »
 *woo* *yeah* *good3*
Good Advice
0
No reactions
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Online ironhead

  • A's Best Friend
  • ***
  • Join Date: Feb 2019
  • Posts: 199
  • Karma: 0
Re: Needs Work
« Reply #39 on: 18.10. 2020 22:06 »
rd fella my claim to fame as a young en was wearing down the sides on one of those tyres on the starfire. my mates always pointed at it with disbelief , I was fearless back then or just young and crackers!

Had one of those on a Commando once, wore the foot pegs down but the tyre never let go!
Good Advice
0
No reactions
SA

Offline Doomtrainbarx

  • A's Best Friend
  • ***
  • Join Date: Jun 2020
  • Posts: 30
  • Karma: 0
    • Soundclick
Re: Needs Work
« Reply #40 on: 18.10. 2020 22:20 »
rd fella my claim to fame as a young en was wearing down the sides on one of those tyres on the starfire. my mates always pointed at it with disbelief , I was fearless back then or just young and crackers!

Had one of those on a Commando once, wore the foot pegs down but the tyre never let go!

I've never worn any pegs away in 50 years so it should be O.K.   *smile*
Good Advice
0
No reactions

Online metalflake11

  • Resident Legend
  • *****
  • Join Date: Aug 2012
  • Posts: 652
  • Karma: 9
Re: Needs Work
« Reply #41 on: 19.10. 2020 00:16 »
I've worn a fair few out from the top down, but never any from the bottom up either!

I like to keep my knee 'up'.

Nice work that Doomtrain!
Good Advice
0
No reactions
England N.W
1960 A10
England

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5536
  • Karma: 65
Re: Needs Work
« Reply #42 on: 19.10. 2020 12:52 »
"if it ever is" Well personaly I'd be more than happy with that, it's complete,  looks like it was meant to be- Well done
Some ideas for my upcoming refresh, one question - what is the copper on the footrst pegs and upper fork stantions?
Good Advice
0
No reactions
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline Doomtrainbarx

  • A's Best Friend
  • ***
  • Join Date: Jun 2020
  • Posts: 30
  • Karma: 0
    • Soundclick
Re: Needs Work
« Reply #43 on: 19.10. 2020 13:04 »

Some ideas for my upcoming refresh, one question - what is the copper on the footrst pegs and upper fork stantions?
[/quote]

Bill - the copper is just that - copper tubing cut to length - it's just cosmetic to hide the bare steel fork tubes.
We used to do it in the 60's - looks cool ,and is easy to polish up again when it tarnishes.
Good Advice
0
No reactions

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5536
  • Karma: 65
Re: Needs Work
« Reply #44 on: 19.10. 2020 17:58 »
first time I've seen it, looks the dogs doodahs.
Was thinking of making the front end of my A10 look lighter as in Goldie with exposed upper stantion bit and wondered how to make it look better then semi rusted without purchase of stainless (if you can get them), I'll lookout for sum copper tube

Good Advice
0
No reactions
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco