Author Topic: Engine plates  (Read 133 times)

Offline Bee-Za

  • Moving Up
  • **
  • Join Date: Oct 2019
  • Posts: 25
  • Karma: 0
  • Over 60
Engine plates
« on: 01.11. 2020 18:57 »
Hi
Just a quickie
Per photo are these plates fitted correctly.
I’ve fitted the engine lower plates first, hard to the engine with the curly plate to the primary case side.
Then the upper plates outermost with the curly plate again on the primary side

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8727
  • Karma: 112
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Engine plates
« Reply #1 on: 01.11. 2020 20:21 »
G'day Bee-Za.
Looks good to me.
Cheers
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7