« previous next »
Pages: [1]   Go Down

Author Topic: golden flash tappet adjustment  (Read 196 times)

Offline gary

  • Moving Up
  • **
  • Join Date: Aug 2020
  • Posts: 24
  • Karma: 0
golden flash tappet adjustment
« on: 24.09. 2020 12:04 »
hi.any thoughts on the early golden flash tappet adjustment 10 for intake and 16 for exhaust? seems a bit excessive?
Logged
Pennsylvania

Offline scotty

  • Valued Contributor
  • ****
  • Join Date: Aug 2008
  • Posts: 469
  • Karma: 5
  • Deep Bay, Left Coast, Canada
Re: golden flash tappet adjustment
« Reply #1 on: 24.09. 2020 18:35 »
What camshaft do you have?
I use the same clearance on my iron head flash with a 67334 cam.
no obvious problems.
S
Logged

Scotty

Current liabilities:
'56 A10 Red Flash
'54 B33
‘74 BMW R75-6

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8729
  • Karma: 112
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: golden flash tappet adjustment
« Reply #2 on: 24.09. 2020 21:13 »
G'day Gary.
A very helpful post by MG gives clearances for different cams.
https://www.a7a10.net/forum/index.php?topic=2295.0
Cheers
Logged
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Online JulianS

  • 1962 A10
  • Wise & Enlightened
  • *
  • Join Date: Mar 2017
  • Posts: 1131
  • Karma: 21
Re: golden flash tappet adjustment
« Reply #3 on: 24.09. 2020 22:37 »
This from the factory may be of use.
Logged
Pages: [1]   Go Up
« previous next »