Author Topic: u tube oil end feed  (Read 177 times)

Online sean

  • A's Best Friend
  • ***
  • Join Date: Oct 2012
  • Posts: 80
  • Karma: 0
u tube oil end feed
« on: 18.10. 2020 22:02 »
some interesting videos on u tube .....AG engineering ....on the oil end feed conversion
https://www.youtube.com/watch?v=8CirTGr927I

Online chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 3371
  • Karma: 48
Re: u tube oil end feed
« Reply #1 on: 19.10. 2020 21:36 »
Hi All,
I know he is experimenting but he has missed out on some fundamental design features of the BSA engine
ie, the cush drive not solidly locating the drive side bearing for one

I do not like the method of reaming the cam bushes either, 19mm vs 3/4 reamer's

A straight dummy crank cannot be made in a 3 jaw chuck either

John
1961 Super Rocket
1963 RGS (ongoing)