Author Topic: QD rear wheel spindle  (Read 151 times)

Online flashblack

  • West Devon, England
  • A's Good Friend
  • ***
  • Join Date: Feb 2009
  • Posts: 233
  • Karma: 2
  • 1959 golden flash
QD rear wheel spindle
« on: 20.02. 2021 14:35 »
Can anyone tell me if these were different for a B31?  I notice that the part numbers are not the same for an A10 as for a B31, but is there any physical difference as the spindle in my plunger B31 protrudes about 1/2" through the wheel nut when tightened up. All others i have seen are about flush with the face of the nut.
thanks in advance  Richard
1959 golden flash
1949 B31 plunger

Online JulianS

  • 1962 A10
  • Wise & Enlightened
  • *
  • Join Date: Mar 2017
  • Posts: 1167
  • Karma: 22
Re: QD rear wheel spindle
« Reply #1 on: 20.02. 2021 17:01 »
The swinging arm QD crinkle hub rear wheel spindles for A7 A10 B31 B33 and Gold Star are the same part 67 6161 according to my parts books.

Online flashblack

  • West Devon, England
  • A's Good Friend
  • ***
  • Join Date: Feb 2009
  • Posts: 233
  • Karma: 2
  • 1959 golden flash
Re: QD rear wheel spindle
« Reply #2 on: 20.02. 2021 19:26 »
Hi Julians, mines a plunger part number 67 6164. So i was just wondering if the s/a one was a bit longer?
1959 golden flash
1949 B31 plunger

Online flashblack

  • West Devon, England
  • A's Good Friend
  • ***
  • Join Date: Feb 2009
  • Posts: 233
  • Karma: 2
  • 1959 golden flash
Re: QD rear wheel spindle
« Reply #3 on: 20.02. 2021 19:47 »
Does this look right?
1959 golden flash
1949 B31 plunger