Decided to cure a small oil leak from my rocker cover this Saturday.
Involved removing the rocker cover and applying a new gasket and sealant.
simple I thought.
all you experainced guys will know what came next.
1 hour to remove, cover, clean, fit new gaskets.
6 hours cursing the desginer for bringing the push rods up through the centre of the engibe, and at an angle.
After looking at the design of comb on ebay, and measuring the rocker socket positions, a piece of thick card and a pair of scissors hay presto job was done.
What a bitch of a job though. Next is the Primary side oil leak, what horrors are lurking on that job I wonder.
Dave