« previous next »
Pages: [1]   Go Down

Author Topic: Whats the correct tank knee pad  (Read 593 times)

Offline kanchanau

  • Active
  • *
  • Join Date: Jul 2025
  • Posts: 5
  • Karma: 0
Whats the correct tank knee pad
« on: 08.10. 2025 03:11 »
Whats the correct tank knee pad for bsa a10 plunger 1952 650cc. Most of the guys using the round type one but few triangle type also there .
Logged
Sri Lanka 52 A10

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 11477
  • Karma: 137
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Whats the correct tank knee pad
« Reply #1 on: 08.10. 2025 20:20 »
G'day kanchanau.
My 51 A7 had this type but with two holes to get to screws that hold them onto the stiffening plate and tank.
Cheers
Logged
'51 A7 plunger, '57 A7SS racer now a A10CR,  '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline kanchanau

  • Active
  • *
  • Join Date: Jul 2025
  • Posts: 5
  • Karma: 0
Re: Whats the correct tank knee pad
« Reply #2 on: 10.10. 2025 07:05 »
I Need to know which model goes to A10 ?
Logged
Sri Lanka 52 A10

Online Bsareg

  • Resident Legend
  • *****
  • Join Date: Mar 2016
  • Posts: 575
  • Karma: 4
Re: Whats the correct tank knee pad
« Reply #3 on: 10.10. 2025 09:48 »
As shown above, the triangular type were fitted to both A7/A10 and most other models during the 1952 range.
Logged
Helston, Cornwall C11,B40,B44 Victor,A10,RGS,M21,Rocket3,REBSA
Pages: [1]   Go Up
« previous next »