Author Topic: Clutch help  (Read 768 times)

Offline Hubie

  • Dave Huybens
  • Valued Contributor
  • ****
  • Join Date: Feb 2010
  • Posts: 366
  • Karma: 4
Clutch help
« on: 12.06. 2010 22:19 »
G'day all,

I have the four spring type clutch on my bike and was wondering if anyone has any pics they can post of the clutch centre on the gearbox shaft in situ with the primary inner in place as well as without the clutch centre in place so that I can see what the sliding plate and seal is supposed to look like.

It is a swinging arm a10.


Good Advice
No reactions
1959 BSA Golden Flash
1956 Royal Enfield Super Meteor
1955 Royal Enfield 350 Bullet
2007 Harley Davidson Sportster 1200 Custom

The early bird gets the worm, but the second mouse get's the cheese!

Online chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 3342
  • Karma: 47
Re: Clutch help
« Reply #1 on: 13.06. 2010 15:34 »
Hi Dave,
Attached are a couple of pics of the sliding plate and centre adaptor,
they are off the bike I am building up at the moment,
If you need pics of it assembled I can do this during the week
John O R
Good Advice
No reactions
1961 Super Rocket
1963 RGS (ongoing)