« previous next »
Pages: [1]   Go Down

Author Topic: T-D Fork Dampers  (Read 734 times)

Offline dpaddock

  • NC, USA
  • Valued Contributor
  • ****
  • Join Date: Jul 2006
  • Posts: 429
  • Karma: 5
T-D Fork Dampers
« on: 03.07. 2010 20:35 »
I want to make a set of fork dampers for my DBD similar to the Taylor-Dow units that were made in the 1970's. I'll appreciate your help with dimensional info.

Many thanks,

David
Logged
David
'57 Spitfire

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8617
  • Karma: 112
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: T-D Fork Dampers
« Reply #1 on: 03.07. 2010 20:51 »
G'day David,
                      Go to http://www.a7a10.net/forum/index.php/topic,2869.msg19325.html#msg19325 and remind John O R, and remind him. I was going to buy a set but would rather make one myself.
Cheers
Logged
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Online chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 3419
  • Karma: 48
Re: T-D Fork Dampers
« Reply #2 on: 03.07. 2010 22:10 »
I hav'nt forgotten!!
But I have to remove a damper from my SR to measure the length of the rod betwen the top cap and the damper valve
Forgot to do this when I made the sketch *sad2* *sad2*

Been busy with trying to finish off the other "Bastard" SR thats on the bench  *ex* *ex* *ex*

back soon
John O R
Logged
1961 Super Rocket
1963 RGS (ongoing)
Pages: [1]   Go Up
« previous next »