Sorry to resurrect an old thread but the subject is exactly right for my question
I don't do a great mileage on my A10 so have only just done the second oil change since I took ownership.
All seemed to go well and I am using Morris's Golden Film SAE40 oil to save disturbing any debris in the sludge traps.
However, I would welcome advice on the drain nut which, despite tightening as much as I dare, is slowly weeping oil.
I have a copper washer on my drain nut and was expecting to be able to take it off to anneal but it seems shrunk on and I couldn't remove it without damaging it. I have nothing that size in my copper/fibre washers box!
Would loosening and re-tightening the nut possibly cure it?
If not, what possible remedies do I have please?
Brian