Author Topic: Headrace bearings and clutch adjustment  (Read 2718 times)

Offline Duncan R

  • Valued Contributor
  • ****
  • Join Date: Sep 2008
  • Posts: 291
  • Karma: 3
Re: Headrace bearings and clutch adjustment
« Reply #15 on: 26.09. 2010 21:15 »
Hi Nick,

I have heard of this before - you can run a small track of weld along the inner face of the bearing and the heat causes it to contract and drop out. Mine tapped out ok.
Good Advice
0
No reactions
Anglo - Indian A7SS (Actually is a 650)
Kawasaki ZZR 1100
BMW R80GS
BMW R1100GS