Author Topic: BSA , Triumph & Lucas special tools.  (Read 2304 times)

Offline Flatboy 1950

  • A's Best Friend
  • ***
  • Join Date: Oct 2010
  • Posts: 110
  • Karma: 1
    • Flat Earth Spares
BSA , Triumph & Lucas special tools.
« on: 21.10. 2010 16:04 »
Hi Chaps , Here are some special tools made by my brother , Paul ,when he was serving his apprenticeship at the Atomic Energy Board.
One is for removing A10 / A7 Fork stantions from the taper in the top yoke.
One for pulling stantions into their taper.
One for BSA single mag gear removal ( I had a 350 Goldie at the time)
One for removing & replacing Triumph cam gears
One I made for pulling magneto inner bearings off. Length is for pulling mag-dyna races off , long bolt for K2F.

Cheers , Flatboy.

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8324
  • Karma: 107
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: BSA , Triumph & Lucas special tools.
« Reply #1 on: 21.10. 2010 17:00 »
Quite well made, Flatboy. Most of my home made tools are done in the heat of battle. Just yesterday I made a tool to remove the sprocket nut on a Hardley Drivable. 1 7/8" socket with the drive end cut off and welded to a piece of 1 1/2" pipe. $54 for the socket, the proper tool costs $125.
 I still have the valve spring compressor that I made as an apprentice 33 years ago.
Cheers
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Offline Flatboy 1950

  • A's Best Friend
  • ***
  • Join Date: Oct 2010
  • Posts: 110
  • Karma: 1
    • Flat Earth Spares
Re: BSA , Triumph & Lucas special tools.
« Reply #2 on: 21.10. 2010 18:11 »
Hey Muskrat , Go easy on the anti HD stuff..... I restore old Harleys for a living !!
 My bro. also made a quick change toolpost for my vintage South Bend lathe , makes life easy.

Cheers , Flatboy.

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8324
  • Karma: 107
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: BSA , Triumph & Lucas special tools.
« Reply #3 on: 21.10. 2010 20:05 »
G'day Flatboy,
                       please excuse the pun, no anti's here. Just a lot of head scratching, ratchet gearbox.
 I just sold my 193? Colchester lathe, I wish I hadn't.
Cheers
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7