Author Topic: valve clearances  (Read 731 times)

Offline redbeeza

  • Moving Up
  • **
  • Join Date: Aug 2010
  • Posts: 41
  • Karma: 1
valve clearances
« on: 02.11. 2010 10:27 »
Could someone with a Super Rocket running a 357 cam and 8.25:1 CR let me know which valve clearances they use please? Is it inlet .008"; exhaust .010"; or inlet .010"; exhaust .012"?

Thanks,
Terry
1962 A10 Super Rocket.  First Brit bike, first rebuild.

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 2849
  • Karma: 66
Re: valve clearances
« Reply #1 on: 02.11. 2010 20:38 »
Terry,
             Either will do.
The wider settings are for maximum power with extra noise.
Trev.

Offline redbeeza

  • Moving Up
  • **
  • Join Date: Aug 2010
  • Posts: 41
  • Karma: 1
Re: valve clearances
« Reply #2 on: 03.11. 2010 12:29 »
Thanks Trev, now I'm clear on this.
1962 A10 Super Rocket.  First Brit bike, first rebuild.