View or Hide Header -->
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
This topic
This board
A7 & A10 Engine
A7 1946-1950
Gearbox, Clutch, Primary
Frame
Lucas, Ignition, Charging, Electrical
Amal, Carburation
Entire forum
Google
Home
Help
Search
Contact
Login
Register
The BSA A7-A10 Forum
»
Technical (Descriptive Topic Titles - Stay on Topic)
»
A7 & A10 Engine
»
valve clearances
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: valve clearances (Read 919 times)
redbeeza
Moving Up
Join Date: Aug 2010
Posts: 41
Karma: 1
valve clearances
«
on:
02.11. 2010 10:27 »
Could someone with a Super Rocket running a 357 cam and 8.25:1 CR let me know which valve clearances they use please? Is it inlet .008"; exhaust .010"; or inlet .010"; exhaust .012"?
Thanks,
Terry
Logged
1962 A10 Super Rocket. First Brit bike, first rebuild.
trevinoz
Newcastle, N.S.W. Australia.
Wise & Enlightened
Join Date: Jul 2006
Posts: 3189
Karma: 71
Re: valve clearances
«
Reply #1 on:
02.11. 2010 20:38 »
Terry,
Either will do.
The wider settings are for maximum power with extra noise.
Trev.
Logged
redbeeza
Moving Up
Join Date: Aug 2010
Posts: 41
Karma: 1
Re: valve clearances
«
Reply #2 on:
03.11. 2010 12:29 »
Thanks Trev, now I'm clear on this.
Logged
1962 A10 Super Rocket. First Brit bike, first rebuild.
Print
Pages: [
1
]
Go Up
« previous
next »
The BSA A7-A10 Forum
»
Technical (Descriptive Topic Titles - Stay on Topic)
»
A7 & A10 Engine
»
valve clearances