« previous next »
Pages: [1]   Go Down

Author Topic: Removing steering cups.....  (Read 827 times)

Offline trickytree

  • A's Good Friend
  • ***
  • Join Date: Jun 2010
  • Posts: 146
  • Karma: 1
  • Lincolnshire, England
Removing steering cups.....
« on: 16.11. 2010 21:00 »
..from the headstock, 48 A7 frame. This frame has seen hard times as a chop and the cups are in a right state....the threads are damaged so even if I has the proper tool I doubt it would work. Thought about welding a steel disc onto the cup so that I can drift it out but thought I would check here fist incase anyone has a better idea.

Cheers, Paul.
Logged
1965 A65 Bobber
A10 Bitza project

Offline Brian

  • Wise & Enlightened
  • *
  • Join Date: May 2007
  • Posts: 1806
  • Karma: 43
  • Mt Gambier, South Australia.
Re: Removing steering cups.....
« Reply #1 on: 17.11. 2010 02:48 »
If they are had it and you dont want to use them again then run a bead of weld around the inside of them, let them cool and they will fall out.
Logged

Offline trickytree

  • A's Good Friend
  • ***
  • Join Date: Jun 2010
  • Posts: 146
  • Karma: 1
  • Lincolnshire, England
Re: Removing steering cups.....
« Reply #2 on: 17.11. 2010 21:06 »
Cheers Brian....worked a treat *smile*
Logged
1965 A65 Bobber
A10 Bitza project

Offline malcolm

  • Active
  • *
  • Join Date: Mar 2012
  • Posts: 9
  • Karma: 0
Re: Removing steering cups.....
« Reply #3 on: 29.07. 2012 22:23 »
 *eek*do you have the bearing numbers for the BSApart  66-4149 pleaseand where from
Logged
Pages: [1]   Go Up
« previous next »