Author Topic: A10 plunger pops out of second gear  (Read 731 times)

Offline oldbikerbill

  • A's Good Friend
  • ***
  • Join Date: Aug 2010
  • Posts: 44
  • Karma: 0
  • 1954 Bsa A10 Plunger. Located outside San Diego,
A10 plunger pops out of second gear
« on: 19.11. 2010 01:17 »
My newly rebuilt transmission pops out of second , mostly when cold.  I had the trans rebuilt several years ago but just got the bike back on the road so there's maybe 150-200 miles on it.  Any adjustments that I should make? 
Bsa A10 Plunger, '72 Moto Guzzi Eldorado,'73 Bmw r75/5

Offline A10Boy

  • Wise & Enlightened
  • *
  • Join Date: Jun 2008
  • Posts: 1076
  • Karma: 11
  • Solihull, Near Birmingham England.
Re: A10 plunger pops out of second gear
« Reply #1 on: 19.11. 2010 08:34 »
Yes adjustments are possible.

There is an indent spring arrangement, whereby a plunger in the box is pressed by a spring into a cam plate and holds it in a selected gear. That might need adjusting up.

If you use the search facility you will find loads of info on this.


1958 Super Rocket
Harley Super Glide Custom
Yam XJR 1300