Author Topic: A10 plunger pops out of second gear  (Read 683 times)

Offline oldbikerbill

  • Moving Up
  • **
  • Join Date: Aug 2010
  • Posts: 44
  • Karma: 0
  • 1954 Bsa A10 Plunger. Located outside San Diego,
A10 plunger pops out of second gear
« on: 19.11. 2010 01:17 »
My newly rebuilt transmission pops out of second , mostly when cold.  I had the trans rebuilt several years ago but just got the bike back on the road so there's maybe 150-200 miles on it.  Any adjustments that I should make? 
Bsa A10 Plunger, '72 Moto Guzzi Eldorado,'73 Bmw r75/5

Offline A10Boy

  • Wise & Enlightened
  • *
  • Join Date: Jun 2008
  • Posts: 1075
  • Karma: 11
  • Solihull, Near Birmingham England.
Re: A10 plunger pops out of second gear
« Reply #1 on: 19.11. 2010 08:34 »
Yes adjustments are possible.

There is an indent spring arrangement, whereby a plunger in the box is pressed by a spring into a cam plate and holds it in a selected gear. That might need adjusting up.

If you use the search facility you will find loads of info on this.
Regards

Andy

1960 A10 - Black Golden Flash
Plus
1974 Kawasaki Z1a
Yam XJR 1300