View or Hide Header -->
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
This topic
This board
A7 & A10 Engine
A7 1946-1950
Gearbox, Clutch, Primary
Frame
Lucas, Ignition, Charging, Electrical
Amal, Carburation
Entire forum
Google
Home
Help
Search
Contact
Login
Register
The BSA A7-A10 Forum
»
Technical (Descriptive Topic Titles - Stay on Topic)
»
Frame
»
Plunger Springs
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Plunger Springs (Read 666 times)
Howard
A's Good Friend
Join Date: Jan 2011
Posts: 65
Karma: 3
Plunger Springs
«
on:
24.02. 2011 17:00 »
On the Plunger rear suspenion, does the larger spring go at the top or is it the smaller spring at the top ? I have a drawing of were the spacers go but its not detailed enough to see the spring sizing.
Logged
stephenrc45
Moving Up
Join Date: Feb 2011
Posts: 27
Karma: 0
Re: Plunger Springs
«
Reply #1 on:
24.02. 2011 18:26 »
Larger on the top. The lower ones are smaller because they are the rebound.
Logged
Howard
A's Good Friend
Join Date: Jan 2011
Posts: 65
Karma: 3
Re: Plunger Springs
«
Reply #2 on:
24.02. 2011 18:34 »
Thanks for that, I looked up images of the bikes on the net but still could not see which was which,Then I found a better drawing which confirms it .
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
The BSA A7-A10 Forum
»
Technical (Descriptive Topic Titles - Stay on Topic)
»
Frame
»
Plunger Springs