Author Topic: Gearbox rebuild advice  (Read 5099 times)

Offline brackenfel

  • Valued Contributor
  • ****
  • Join Date: Jan 2010
  • Posts: 271
  • Karma: 2
  • Adrian - Bristol UK
Re: Gearbox rebuild advice
« Reply #15 on: 09.04. 2011 18:30 »
Hi Jules,
I replaced all of the bushes in the casings as they were worn (layshaft, kickstart & gearchange shaft ones) but not the 2 in the gears.. Mine were a little worn but not too bad & I wasn't sure if the effort was worth it trying to get them out so left alone..
Can't advise on these I'm afraid, maybe someone else can.. Good luck with them..

Adrian
1961 A10 650 Golden Flash - Blue
1954 BSA B33
Velocette Viper
Laverda 750 SF1
Kawasaki W650
Buell XB9S
Ariel 350NH & Matchless G3LS in bits...

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 2849
  • Karma: 66
Re: Gearbox rebuild advice
« Reply #16 on: 10.04. 2011 02:48 »
Jules,
            Why the hell would you take a gearbox to the UK for overhaul?
They are simple to work on. With a bit of care anyone can rebuild them.
  Trev.