Author Topic: Dynamo wiring connections?  (Read 1400 times)

Offline RoadRunner

  • A's Best Friend
  • ***
  • Join Date: May 2010
  • Posts: 192
  • Karma: 2
  • Thinking Time
Dynamo wiring connections?
« on: 27.03. 2011 18:09 »
Hi,
Not really another question but would just like to check something - when wiring up the dynamo, do I:
1) strip the end of the yellow and green wires
2) push these ends through the arched bakerlite(?) retaining plate
3) then push the wires through the split brass bullet-like connector (which seem to be a loose fit?)
4) spread the bare wires back up around bullet-like connector

I gather these connections should not be soldered?

Or have I got completey the wrong end of the stick??

Cheers

RoadRunner


Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5341
  • Karma: 61
Re: Dynamo wiring connections?
« Reply #1 on: 27.03. 2011 18:42 »
Hope you are right - that's what I do
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline RoadRunner

  • A's Best Friend
  • ***
  • Join Date: May 2010
  • Posts: 192
  • Karma: 2
  • Thinking Time
Re: Dynamo wiring connections?
« Reply #2 on: 27.03. 2011 21:54 »
Cheers Bill - couldn't think of doing it any other way but there again.......!

Oh, and how just do you get them to fit in nice and snug?

RoadRunner

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 2849
  • Karma: 66
Re: Dynamo wiring connections?
« Reply #3 on: 27.03. 2011 22:12 »
If the sleeves are loose in the sockets just slip a blade or such into the split and expand them.
  Trev.