« previous next »
Pages: [1]   Go Down

Author Topic: longstroke A7 pistons  (Read 1305 times)

Offline terryk

  • Valued Contributor
  • ****
  • Join Date: Oct 2006
  • Posts: 460
  • Karma: 3
  • Townsville Queensland Australia
longstroke A7 pistons
« on: 01.06. 2011 13:18 »
Has anyone used these L.F.Harris pistons in a longstroke A7? They are listed as A7 but make as Triumph and 9.1 comp. I am looking at 7.25 comp but could machine off the top of these to match. Any thoughts.

http://www.vintage-motorcycle.com/index.php?language=en&site=4&pid=160&id=13711&suchtext=bsa%20a7%20pistons&limit=0
Logged
1950-53 A10 rigid/plungers, 1958-61 A10 super rockets, 1947-50 A7 longstrokes, 1949 Star twin,
1951-54 A7 plungers, 1940s M21, WDM20s,
1948-50s B33s rigid/plunger/swingarm, 1948-50s b31s rigid/plunger/swingarm

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 10779
  • Karma: 130
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: longstroke A7 pistons
« Reply #1 on: 01.06. 2011 21:07 »
G'day Terry,
                don't have a LS A7 but used harris pistons in the A7SS racer, they were T150/160 9:1's and performed quite well.
Be careful lopping off the top, don't make them too thin.
Cheers
Logged
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline fido

  • Ferdinandovac, Croatia
  • Resident Legend
  • *****
  • Join Date: Aug 2006
  • Posts: 712
  • Karma: 9
Re: longstroke A7 pistons
« Reply #2 on: 01.06. 2011 21:14 »
Yes, it would be safer to make a compression plate although you then find the pushrods are too short  *doh*
Logged
Pages: [1]   Go Up
« previous next »