« previous next »
Pages: [1]   Go Down

Author Topic: Tank Badge Treads  (Read 761 times)

Offline Howard

  • A's Good Friend
  • ***
  • Join Date: Jan 2011
  • Posts: 65
  • Karma: 3
Tank Badge Treads
« on: 28.06. 2011 22:44 »
My 51 A7 petrol tank has had the bolt holes for the badges and knee pads, filled with what looks like body filler. I want to try and drill this out and run a tread tap down the holes. Does anyone know what tread these would be ? Thanks, regards Howard
Logged

Offline BSA_54A10

  • Wise & Enlightened
  • *
  • Join Date: May 2008
  • Posts: 2544
  • Karma: 37
    • BSA National
Re: Tank Badge Treads
« Reply #1 on: 29.06. 2011 10:47 »
65-8201  slotted countersunk screw 4BA x 1/2" fitted to the plastic badges & to winged BSA
65-8317  slotted countersunk screw 5BA x 1/4" fitted to earlier tanks with the long flash and oval enamel badge that went under the knee rips
Logged
Bike Beesa
Trevor

Offline Howard

  • A's Good Friend
  • ***
  • Join Date: Jan 2011
  • Posts: 65
  • Karma: 3
Re: Tank Badge Treads
« Reply #2 on: 29.06. 2011 17:47 »
Many thanks Trevor....Regards Howard
Logged

Online trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3189
  • Karma: 71
Re: Tank Badge Treads
« Reply #3 on: 29.06. 2011 23:09 »
Howard,
                  Knee pads screws should be 1/4"x 26 TPI.
 Trev.
Logged
Pages: [1]   Go Up
« previous next »