Author Topic: The Long Ride, 2400 miles on a '52 A10  (Read 1700 times)

Offline gold33

  • A's Good Friend
  • ***
  • Join Date: Feb 2009
  • Posts: 110
  • Karma: 1
The Long Ride, 2400 miles on a '52 A10
« on: 21.11. 2011 10:41 »
I have return with a huge smile,
2400 miles in 8 days on my '52 A10. Cruised happily between 55 and 70MPH but was a little uncomfortable at 45-50MPH, in fact it vibrated so much I couldn't find a comfortable spot on the seat for couple of days after doing 45 for 3 hours while sitting behind a '51 Panther outfit *eek*
The A10 made a fantastic mount for what was a very long way even for a few modern machines. 2 Harleys and a Suzuki M109 were seen on trailers during the trip and 5 others didn't make the distance.
The A10 dynamo failed on the first day... right hand fork seal lasted to the 2nd day then nothing until the last full day. After a fabulous run through the Grampians and then the Great Ocean Rd I noticed a new sound, just an occasional light tinny arching sound but no other symptoms other than the need for 2-5 kicks to start instead of one.
The run to the first stop on the last full day was uneventful until, 20km short of the start of the final leg through the Snowy Mountains I came to a halt *ex*
After a painful 20km at 30-35MPH I made it to the nearest town with an additional problem, the clutch wouldn't disengage.
I discovered the 2 screws holding the end of the magneto in place had vibrated out but were still in the casing, tightened with lock tight and problem one was solved. The clutch issue turned out to be the actuating rod... or lack there of, seems the rod wasn't hardened and is now too short to do anything.

The final run was brilliant, the bike was flying, 60-65MPH through most of the ranges to Canberra and then 70-75MPH to Sydney... Then it happened again! coasted to a halt, After checking the spark (none) I pulled the end off the magneto and gave the kick start a push (plugs out) and found the points unmoved for my efforts, I pulled the timing cover off and found the fibre gear had no teeth. A huge thank you to Musky, I fitted his spare and got her running again but in the end decided to have the bike carried home, riding through Sydney with no clutch seemed like a suicide mission.

In conclusion, the only failure of a component that I had rebuilt was the magneto. The rest were failures of things I hadn't got to yet.
So, will an old bike do a big trip? yep, would I do it again... I am! in 2013 I will head off on the ride to Cooktown, this time we will arrive with both of us on our own wheels *smiley4*

A huge thank you to eveyone on here that helped with their advice and an even bigger one to Musky, without whom we wouldn't have had such a fantastic trip.

A link to my photos of the trip for those that are interested
http://www.freewebs.com/longride2010/apps/photos/album?albumid=12598358

Darren
'52 Plunger

Offline LJ.

  • Peterborough UK.
  • Wise & Enlightened
  • *
  • Join Date: Jun 2006
  • Posts: 1403
  • Karma: 15
  • The Red A10!
    • LJ's Website!
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #1 on: 21.11. 2011 12:28 »
Thats absolutely fantastic! thanks for sharing that with us, interesting to hear of the problems that crop up, the fun and satisfying part is doing roadside fixes... you let us down with your clutch though as a small hack saw and ball bearing or something would have given a good temporary fix to get you home. Just sawing the push rod in half and inserting ball would have worked fine.  *smile*
Ride Safely Lads! LJ.
**********************
1940 BSA M20 500cc Girder/Rigid- (SOLD)
1947 BSA M21 600cc Girder/Rigid-Green
1949 BSA A7   500cc Girder/Plunger Star Twin-(SOLD)
1953 BSA B33  500cc Teles/Plunger-Maroon
1961 BSA A10  650cc Golden Flash-Blue
1961 BSA A10  650cc Golden Flash-Red

Offline Beezageezauk

  • N.E. England
  • Resident Legend
  • *****
  • Join Date: Mar 2006
  • Posts: 669
  • Karma: 21
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #2 on: 21.11. 2011 19:41 »
I agree with LJ....fantastic.

It's great to see an old bike used like this.  You must be really proud of both yourself and the bike.

Beezageezauk.

Offline t20racerman

  • A's Good Friend
  • ***
  • Join Date: Feb 2011
  • Posts: 232
  • Karma: 7
  • Keep it nailed!
    • The T20 'Super Six' Suzuki website
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #3 on: 25.11. 2011 18:50 »
Wow - sounds great. Shame about the odd 'mishap' but that isn't too bad for a 50+ year old bike is it?

I'd love to do something like that on my A10 but not sure if I'm brave enough!  *smile*
1944 WN/G based trials Ariel
1961 A10 - somewhat modified :-)
1967 T20 Suzuki - heavily modified Classic Racer
1967 T20 Suzuki - pretty standard road bike
2007 KTM 660 SMC - fast and furious supermoto
Triumph Tiger (modern one)

"If I had all the money back that I've spent on motorcycles... I'd spend it all on motorcycles!"

Offline gold33

  • A's Good Friend
  • ***
  • Join Date: Feb 2009
  • Posts: 110
  • Karma: 1
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #4 on: 30.11. 2011 03:36 »
LJ, it was more fun helping with the Panther! Once it was my turn I was on my own...
Unfortunately nobody suggested carrying ball bearings or a hacksaw and the good folk in the beer garden at the Cann River Hotel didn't have any either.

The ride proved to me that all of these machines are still capable of being riden regularly with no greater fear of failure than a new machine.
Apart from crashes (2 caused by severe weather in Tas' , 3 amongst the offroad fanatics and 1 Kangaroo hit at 140kph according to the reports) there were 2 Harleys and a Suzuki that broke down more often than the two machines that were both nearly 60yrs old and they couldn't be fixed on the side of the road (trucked to camp and repaired overnight).
The offers of assistance and encouragement from locals along the route for the 2 older machines was fantastic, we had people from many different generations and backgrounds coming up to us along the way.
Darren
'52 Plunger

Offline mike667

  • A's Good Friend
  • ***
  • Join Date: Nov 2008
  • Posts: 213
  • Karma: 0
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #5 on: 03.12. 2011 14:43 »
sounds fantastic!

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4528
  • Karma: 41
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #6 on: 03.12. 2011 15:24 »
Cooktown hey?? that's only 2.2ishk up the road + same back ?? Hmmm.? me's tinkin'...........when??
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Online Triton Thrasher

  • Scotland
  • Wise & Enlightened
  • *
  • Join Date: Feb 2009
  • Posts: 1928
  • Karma: 23
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #7 on: 03.12. 2011 20:17 »
Great, these old bikes, aren't they!


Now you know how to prep it for more reliability, with regard to clutch rod and all that.  Fix each problem so it doesn't happen again.

Sad to say, Tufnol pinions are not dependable.

Offline *nick*

  • Melbourne, Australia
  • Moving Up
  • **
  • Join Date: Jun 2011
  • Posts: 37
  • Karma: 0
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #8 on: 08.12. 2011 03:19 »
well done Darren, gorgeous bike too!

Offline saltbox Alf

  • Moving Up
  • **
  • Join Date: Oct 2011
  • Posts: 41
  • Karma: 1
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #9 on: 10.12. 2011 08:18 »
Well done for an inspiring trek, just goes to show what can be done. much better to see the bike on the road, than hiding in a comfy shed!!
I like bike, especially my 61'SR

Offline gold33

  • A's Good Friend
  • ***
  • Join Date: Feb 2009
  • Posts: 110
  • Karma: 1
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #10 on: 20.12. 2011 14:40 »
Dutch,
The next ride is from the 4th to the 12th of May 2013. I will be joining the run on the Flash, have to finish on my own wheels. *smile*

I would love to find an alternative to the fibre (Tufnol) gear, any suggestions? 3500 miles sound a little on the light side for the life expectancy of this gear!
Do they deteriorate with age as well as wear?

Unfortunately the Flash is in the shed until I can get my auto advance rivited to my new fibre gear... missing her at the moment! *sad2*
Darren
'52 Plunger

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3184
  • Karma: 71
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #11 on: 20.12. 2011 20:01 »
Darren,
            you should be able to source an alloy gear, I have seen them in steel but were probably home made or a "foreign order".
Where do you get the 3500 miles figure? I have never stripped one [yet]. Surely a new Tufnol gear will outlast the owner, going on the age of some of mine.
                                   Trev.

Offline gold33

  • A's Good Friend
  • ***
  • Join Date: Feb 2009
  • Posts: 110
  • Karma: 1
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #12 on: 20.12. 2011 22:03 »
Where do you get the 3500 miles figure?
That's the approximate distance covered since Peter Scott rebuilt the magneto including (I thought) a new fibre gear.

Are there any arcing or current loss issues with using alloy?
Darren
'52 Plunger

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3184
  • Karma: 71
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #13 on: 20.12. 2011 23:52 »
Should be no problems with arcing etc. as the bearings should be insulated.
If the Tufnol gear was a new one, I would be giving Mr. Scott a bit of a serve for using rubbish.
Have a look at the remaining teeth. You should get a bit of an idea whether it was a new gear by the amount of wear.
Remember our early Holdens used Tufnol timing gears on the camshaft and they lasted forever. [Or until you valve bounced the engine severely!]
  Trev.

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 10758
  • Karma: 130
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: The Long Ride, 2400 miles on a '52 A10
« Reply #14 on: 21.12. 2011 09:55 »
 Ah, that's why both my HQ's let go. *eek*
 That one I loaned you is the original off the '51. I went lectric in '99.
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7