Author Topic: idler / camshaft pinion  (Read 1028 times)

Offline Russ

  • A's Best Friend
  • ***
  • Join Date: Aug 2009
  • Posts: 214
  • Karma: 1
idler / camshaft pinion
« on: 26.11. 2014 10:06 »
Have just stumbled across a small problem I have, or maybe not?
For the future rebuild of my 51 A10 I have in my parts box an Idler pinion numbered 67-336 and a Camshaft pinion numbered 67-338. I am unable to locate 67-336 listed anywhere while Draganfly has 67-338 listed for an A50 / A65. My parts book,(A7 / A10 1949 to 1953) lists the Idler pinion as 67-335 and the Camshaft pinion as 67-337.
What pinions do I have and are they compatible with my A10.

Thanks Guys,
Russ

Trev, If you happen to read this, I think you gave me one of the pinions I have but can't remember which one.
1951 A10 Plunger.
Australia

Offline a10gf

  • Wise & Enlightened
  • *
  • Join Date: Sep 2006
  • Posts: 2802
  • Karma: 42
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: idler / camshaft pinion
« Reply #1 on: 26.11. 2014 11:07 »
Here's what's been working on my A10 plunger, stamped nr's are unclear.

From left to right:  44   49   22,  & from the photo check the placement of marks.

And some interesting reading > http://www.a7a10.net/forum/index.php?topic=789.msg5017

A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Online beezermacc

  • Resident Legend
  • *****
  • Join Date: Dec 2011
  • Posts: 996
  • Karma: 39
  • Not for the purist!
    • Priory Magnetos Ltd.
Re: idler / camshaft pinion
« Reply #2 on: 26.11. 2014 15:14 »
The critical issue is to make sure you haven't got a rogue gear from a longstroke which have the same number of teeth but timing marks in different places. There are some good pictures of what you should have on the Cheshire BSA website  www.cheshirebsa.co.uk
Priory Magnetos Ltd - A10 spares, magneto and dynamo refurbs. www.priorymagnetos.co.uk

Offline Russ

  • A's Best Friend
  • ***
  • Join Date: Aug 2009
  • Posts: 214
  • Karma: 1
Re: idler / camshaft pinion
« Reply #3 on: 26.11. 2014 22:09 »
Thanks Guys,
Excellent photo a10gf I will check mine against yours.
beezermacc you started me on this as I followed your previous post to the cheshirebsa site where I discovered my pinions had different numbers.
I will now check the number of teeth on mine and position of timing marks. If they are right I should use them, however, I'm a bit anal and will probably start a search for pinions with the correct numbers as listed in the parts book. I will then know that those two gears in there have the right numbers. Happy!!

Russ
1951 A10 Plunger.
Australia

Online RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 5064
  • Karma: 48
Re: idler / camshaft pinion
« Reply #4 on: 27.11. 2014 00:32 »
Russ,

My parts book lists 67-335 as the idler pinion with spindle and key for 56/57 swingarm with 67-336 as the pinion,only.

Richard L.
Plan on signing up for the world-wide 2020 DISTINGUISHED GENTLEMAN'S RIDEon September 27, 2020 (if it's not cancelled and we are free to move about by then). Watch website at https://www.gentlemansride.com for details.

Offline Russ

  • A's Best Friend
  • ***
  • Join Date: Aug 2009
  • Posts: 214
  • Karma: 1
Re: idler / camshaft pinion
« Reply #5 on: 27.11. 2014 01:09 »
Thanks Richard.

Does anyone know if the pinions I have are compatible with my 51 A10 Plunger.

Russ
1951 A10 Plunger.
Australia

Online beezermacc

  • Resident Legend
  • *****
  • Join Date: Dec 2011
  • Posts: 996
  • Karma: 39
  • Not for the purist!
    • Priory Magnetos Ltd.
Re: idler / camshaft pinion
« Reply #6 on: 27.11. 2014 08:45 »
The pinions on all the post-longstroke A7's and A10's are all the same.
Priory Magnetos Ltd - A10 spares, magneto and dynamo refurbs. www.priorymagnetos.co.uk

Offline Russ

  • A's Best Friend
  • ***
  • Join Date: Aug 2009
  • Posts: 214
  • Karma: 1
Re: idler / camshaft pinion
« Reply #7 on: 27.11. 2014 08:59 »
Thanks Andrew, that's exactly what I wanted to know.

Russ
1951 A10 Plunger.
Australia

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 2904
  • Karma: 67
Re: idler / camshaft pinion
« Reply #8 on: 28.11. 2014 05:36 »
Russ,
          Don't panic, the number on the part is usually not the part number but one off.

Trev.

Offline Russ

  • A's Best Friend
  • ***
  • Join Date: Aug 2009
  • Posts: 214
  • Karma: 1
Re: idler / camshaft pinion
« Reply #9 on: 29.11. 2014 01:17 »
Thanks Trev,
Happy now.
Russ
1951 A10 Plunger.
Australia