Author Topic: full width hub  (Read 611 times)

Offline andy

  • A's Good Friend
  • ***
  • Join Date: Apr 2011
  • Posts: 66
  • Karma: 1
  • and so the fun begins !!
full width hub
« on: 27.12. 2011 19:57 »
ay up like the title says i have got a full width hub and am i right in thinking that there should be a thin nut to hold on the brake plate(part No ?????) and a dust seal/bearing cover(part No????) for the other side. if so has any one got the said bits for sale or part numbers cheers.....
only 2 things needed in life wd40 and duck tape....if it moves and shouldn`t use tape if it don`t move and should use wd40.

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5720
  • Karma: 66
Re: full width hub
« Reply #1 on: 27.12. 2011 20:45 »
I would think most of the much used traders will know what you want if phoned or contacted.
Haven't got my parts book handy or I would have given you the numbers
Only thing to lookout for is the size of the plate on the other side it's classed as one inch bigger than the hub size, so 8 inch hub needs 9 inch plate and 7 inch needs 8 inch plate
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco