My A10 recently started to leak oil from the rocker cover. I fitted new gaskets but whilst re-assembling, I misaligned the pushrods with rocker cups, and managed to bend an exhaust valve and snap the valve guide in the process. Things were put back together with new valve and guide and new push rods (because the old ones had bent slightly). Oil leak is sorted, but the rocker adjustment on the exhaust valves is now at it's limit with virtually no thread visable past the locknut. Has anyone else out there had this, or do I possibly have incorrect push rods. I recollect that there was plenty of thread visible with the old push rods.
Bike runs ok and I have been for a 30 mile ride on it.