Author Topic: Layshaft end float  (Read 625 times)

Offline alanp

  • Plymouth, Devon
  • Valued Contributor
  • ****
  • Join Date: Jul 2009
  • Posts: 473
  • Karma: 7
Layshaft end float
« on: 05.10. 2012 16:37 »
I was reassembling my spare (non RRT2) gearbox which had been gathering dust as a box of bits the other day and was wondering if anyone knows how much end float there should be on the layshaft assy.
Anyone know?
Member of the 'Last of the Summer Wine Club - Jennycliff'.

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4540
  • Karma: 41
Re: Layshaft end float
« Reply #1 on: 05.10. 2012 16:53 »

  Hi Al, Can't be sure, 1 or 2 thou? I think so long as it spins free with minimal is ok? but I think I made mine about 4 thou, but was going for less, thing is I had to hunt around for the right thickness of gasket paper to get it to that.
  Am sure someone else can know for sure.
Cheers
 
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia