« previous next »
Pages: 1 [2]   Go Down

Author Topic: Main bearing  (Read 2005 times)

Online WozzA

  • Wise & Enlightened
  • *
  • Join Date: Nov 2011
  • Posts: 1480
  • Karma: 18
  • Melbourne Australia
Re: Main bearing
« Reply #15 on: 31.10. 2012 10:20 »
ewww....  that does'nt sound good...    *razz*  dodgy parts..   *razz*

It should be a goody Brian... it's a NSK NF206W unopened box...
& also name & numbers stamped on the bearing..
Logged
'51 Golden Flash Plunger
'57 Golden Flash Swingarm

Melbourne
The biggest lie I tell myself is
"I don't need to write that down, I'll remember it"

Online WozzA

  • Wise & Enlightened
  • *
  • Join Date: Nov 2011
  • Posts: 1480
  • Karma: 18
  • Melbourne Australia
Re: Main bearing
« Reply #16 on: 10.11. 2012 07:33 »
It looks like I'm up 4 a timing side bush as well...   *doh* 
is it the same process to remove as the Main Bearing....   with HEAT? 
Logged
'51 Golden Flash Plunger
'57 Golden Flash Swingarm

Melbourne
The biggest lie I tell myself is
"I don't need to write that down, I'll remember it"

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3189
  • Karma: 71
Re: Main bearing
« Reply #17 on: 10.11. 2012 18:57 »
Certainly is, Wozza.

Trev.
Logged

Online WozzA

  • Wise & Enlightened
  • *
  • Join Date: Nov 2011
  • Posts: 1480
  • Karma: 18
  • Melbourne Australia
Re: Main bearing
« Reply #18 on: 11.11. 2012 00:14 »
Thanks Trev..   wink2
Logged
'51 Golden Flash Plunger
'57 Golden Flash Swingarm

Melbourne
The biggest lie I tell myself is
"I don't need to write that down, I'll remember it"
Pages: 1 [2]   Go Up
« previous next »