Author Topic: Chainwheel a10.  (Read 590 times)

Offline michael snellin

  • A's Best Friend
  • ***
  • Join Date: Jul 2012
  • Posts: 51
  • Karma: 0
Chainwheel a10.
« on: 18.11. 2012 16:52 »
Hi every one just wonderd how much play there should be on the assembled chain wheel only once i have fitted this part seems to be, if you like a bit floppy !!!!also how on earth do you lock the clutch washer on the  gearbox mainshaft.any help wil be much appreciated.
Good Advice
0
No reactions

Online morris

  • Wise & Enlightened
  • *
  • Join Date: Aug 2012
  • Posts: 1634
  • Karma: 26
  • Antwerp, Belgium
Re: Chainwheel a10.
« Reply #1 on: 18.11. 2012 22:39 »
Hi Michael,

The subject has already been on the board a couple of times.
Here's one that might contain some information which may be helpful to you;

http://www.a7a10.net/forum/index.php/topic,5800.msg39710.html#msg39710

(Muskrat posted an interesting technique on this thread *smile*)

The chainwheel (I suppose you mean the big chainwheel from the primary chain?) should be be tight, and not wobble at all.
Could be that the taper on the gearbox mainshaft and/or the taper of the clutch centre has worn out.
If it's the gearbox main shaft that's wobbly, probably the gearbox's bearings have worn.
I'm sure someone can add some more horror to this?

Anyway, have fun
Patrick
Good Advice
0
No reactions
'58 BSA A 10 SA
'52 BSA A 10 Plunger
'55 MORRIS ISIS
The world looks better from a motorbike
Belgium