hiya T-dubbwya,
This is a copy of a request that I sent to "Lightning Spares' a while back, to no fruition, but may be worth, having a look.
Pictures attached
67-6077--------Hub Collar(R/h)?? (Not on your list, yet?)
similar to -> 67-6066, but shorter, photos attached.
(O.D.1 x O.D.2 x I.D.x length)=35.0mm x 31.12mm x 22.6mm x 17.24mm long, Sorry 'bout the metric- Imp.verniers not here.In English~1,3/8 x 1,1/4 x 1,7/8 x11/16 L.
Thanks for the reminder-something else I have to deal with, I think they're a bitch setup, and I may be wrong but think that the spindle needs to be tightened in conjunction with the bearing retainer 23 (67-6076), to load the bearing evenly from both directions, if you know what I mean, as the bearing OD is a more snug fit in the hub than the subsequent '54-'57, and '65->A65 Swing Arm models, which seem to 'float', and find their own place.
I hope the photos are a bit of help,
, just looking now, makes me wonder as to what purpose this spacer serves the bearing cant be forced inwards as there are lugs (rivets?) to prevent this,
Regarding this, I'm not sure which spacer you mean, presumably 28/ 67-6061, It's there to space the bearings correctly, very important, otherwise they WILL jam-bigtime.
And yes it does butt up to #26(67-6066) length is obviously more crucial than diameters, though ID should be snug slide on spindle
As I said it's something I also have to tend to, so will try and stay in tune ('t ain't easy!!)
Cheers, duTch