Author Topic: gearbox stamps  (Read 606 times)

Offline a10col

  • Active
  • *
  • Join Date: Jan 2013
  • Posts: 3
  • Karma: 0
gearbox stamps
« on: 02.01. 2013 01:01 »
Hi to all this is my 1st post *smile*
I am building a a10 plunger 1952, I bought  the bike in a loosely built condition with three gearboxs and loads of bits missing the problem is i have no idea what gearbox should be fitted out of the three or even if any are the correct one.
I have seen a few on ebay and the stamp thay have is STD, but the boxs i have only have a single letter on each in the same place, box 1 has the letter R,
box 2 has the letter P, and box 3 has the letter L,. Can anyone help me identify what i have ?
Thanks in advance for any help
Colin.
Good Advice
0
No reactions

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8421
  • Karma: 110
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: gearbox stamps
« Reply #1 on: 02.01. 2013 12:45 »
 G'day Colin, welcome to the forum.
                                                Are your letters stamped in the same spot as the std at the top of the inner cover? Your inner cover might have been a replacement part and not stamped as usual, but with the fitters inital. Throw up a few pics of your bits.
Cheers
Good Advice
0
No reactions
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7