Hi All, just fired up my A10 after rebuild due to it having dropped a crank thrust washer. How long should it run before I start to see bubbles back in the oil tank. I have only run it twice so far, first time for about 10 seconds second time about 20 seconds cooling down between these starts, sort of heat slaving it I guess. I have a clear tube in the feed to the rockers and a few bubbles have appeared in that but not a full flow.
Just thought I would check, rather be safe than sorry after all the time/expense of a rebuild. Oh! just remembered I did bleed the oil pump by loosening the pressure release until the oil flowed, so how long then folks before the bubbles appear in the oil tank.
Regards Huddie