Author Topic: setting timing on 1954 GF  (Read 405 times)

Offline victortrry

  • Moving Up
  • **
  • Join Date: Apr 2014
  • Posts: 28
  • Karma: 0
setting timing on 1954 GF
« on: 27.04. 2014 07:25 »
I got my reconditioned magneto back yesterday and spent the whole afternoon setting the timing.  I thought it was good this morning it was hard to start.  I pulled it apart and found that AAU had turned a little as I was tightening it up, took it off and put a little valve grinding paste on the inside of the AAu and then tightened it up.
This must have solved the problem it starts first kick now. Has anyone else experienced this problem?
Good Advice
0
No reactions

Online Triton Thrasher

  • Scotland
  • Wise & Enlightened
  • *
  • Join Date: Feb 2009
  • Posts: 1548
  • Karma: 20
Re: setting timing on 1954 GF
« Reply #1 on: 27.04. 2014 07:55 »
Yes it's more than common!

Always recheck the timing after tightening the nut.
Good Advice
0
No reactions

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8475
  • Karma: 111
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: setting timing on 1954 GF
« Reply #2 on: 27.04. 2014 08:33 »
Ha, I remember one poor bugga doing it at least 6 times. Wonder who that was. *whistle*
Cheers
Good Advice
0
No reactions
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7