Author Topic: wm3 Rim  (Read 414 times)

Offline tv175

  • Moving Up
  • **
  • Join Date: Aug 2011
  • Posts: 23
  • Karma: 0
wm3 Rim
« on: 23.06. 2013 17:39 »
can / is it possible to use -59 super rocket cast iron hub to hub WM3 rim?
  Tapani
Good Advice
0
No reactions

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8468
  • Karma: 111
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: wm3 Rim
« Reply #1 on: 23.06. 2013 20:55 »
G'day Tapani.
Anything is possible! If the rim is dimpled and drilled in the right pattern. With a tyre on there's not enough room between the forks at the front, and the drive chain will rub the tyre at the rear. Even if you offset the rear rim (a la HD) it would then rub the swingarm on the right. *work*
Cheers
Good Advice
0
No reactions
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7