Author Topic: wm3 Rim  (Read 523 times)

Offline tv175

  • Moving Up
  • **
  • Join Date: Aug 2011
  • Posts: 23
  • Karma: 0
wm3 Rim
« on: 23.06. 2013 17:39 »
can / is it possible to use -59 super rocket cast iron hub to hub WM3 rim?
  Tapani

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 10779
  • Karma: 130
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: wm3 Rim
« Reply #1 on: 23.06. 2013 20:55 »
G'day Tapani.
Anything is possible! If the rim is dimpled and drilled in the right pattern. With a tyre on there's not enough room between the forks at the front, and the drive chain will rub the tyre at the rear. Even if you offset the rear rim (a la HD) it would then rub the swingarm on the right. *work*
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7