Boy comes back on A10 and says horns not working. Take a look, see loose wire to horn, OK easy. Go to do job and find grub screw on back of horn missing, can not get to it.
Remove head light, can not get to it.
Remove nacelle/cowling around forks get to it fit new grub screw and tighten against loose wire.
Spot fork leg has dropped, get pulling tool to pull back up, nut drops off end into fork leg

.
Much swearing

Undo front break, remove wheel, remove mudguard, remove fork leg, tip out fork oil and find nut.
Repair fork leg pulling tool.
Refit fork leg, refit mudguard, refit wheel can’t it won’t fit
Much swearing

Leave for 10 days
Undo fork legs and loosen in yoke.
Refit wheel, pull up fork legs and tighten everything up. Refit nacelle, refit break and check everything horn work, front break works.
Ok no swearing now do I brave my luck and go and refit the headlight to finish the job, what could go wrong, NO wait I said that 10 days ago when I went to put the wire back onto the horn.