Author Topic: I.D. these plates please??  (Read 969 times)

Offline Bsa Nut

  • A's Best Friend
  • ***
  • Join Date: Oct 2013
  • Posts: 55
  • Karma: 0
I.D. these plates please??
« on: 01.12. 2013 22:14 »
http://www.flickr.com/photos/89103304@N07/11160192796/

These plates came with my A7 project. Either I'm orienting them wrong via stupidity, or they aren't the right plates.
Im working from a '54 swinging arm frame. The holes don't seem to line up with the engine cases, or the frame.
I could provide some center numbers if needed. I thought perhaps someone could visually identify them.
Maybe they are for a plunger?
Thanks in advance!
-Luke

Online Brian

  • Wise & Enlightened
  • *
  • Join Date: May 2007
  • Posts: 1708
  • Karma: 41
  • Mt Gambier, South Australia.
Re: I.D. these plates please??
« Reply #1 on: 01.12. 2013 22:55 »
This might help. It looks like you have the correct ones.

The two with the offset go on the left side, you should be able to see this in the pics.

Offline Bsa Nut

  • A's Best Friend
  • ***
  • Join Date: Oct 2013
  • Posts: 55
  • Karma: 0
Re: I.D. these plates please??
« Reply #2 on: 01.12. 2013 23:03 »
Okay, I see how the are placed now...
Wow. Not how I was trying to do it.
Thanks a bunch. When I get out to the garage, I will double check.
It is sort of mysterious bolting up something that I didn't take apart,
or that I have never seen together.
I will mock it up later, and post the pics to make sure.
-Luke

Offline a10gf

  • Wise & Enlightened
  • *
  • Join Date: Sep 2006
  • Posts: 2802
  • Karma: 42
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: I.D. these plates please??
« Reply #3 on: 02.12. 2013 00:09 »
offtopic, looking at your pictures on flickr, much great work there!

A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Offline Bsa Nut

  • A's Best Friend
  • ***
  • Join Date: Oct 2013
  • Posts: 55
  • Karma: 0
Re: I.D. these plates please??
« Reply #4 on: 02.12. 2013 00:22 »
offtopic, looking at your pictures on flickr, much great work there!

Thanks so much...keep tuned in for the progress on this beastly creature. ;)

Offline Rocket Racer

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 1430
  • Karma: 16
  • A kiwi with a racing A10 rig and too many projects
    • NZ Classic Sidecar Racing
Re: I.D. these plates please??
« Reply #5 on: 02.12. 2013 07:30 »
Looking at your frame mods, two things come to mind. 1. the rigid BB32R factory frames which were based on the swingarm frame front half typically had a vertical tube around 6 inches forward of the back axle, probably have a factory drawing on my other computer and theres probably a copy on this website - but this tube on each side helps stiffen up the frame
2. there was a forum member looking for some footrest tubes recently and you appear to have some spares  ;)

Look forward to seeing progress, what style of build are you working towards?

have attached an image of Bender, my own replica rigid frame as reference which is documented in the the road rocket racing sidecar.
I look forward to following your build!

A good rider periodically checks all nuts and bolts with a spanner to see that they are tight - Instruction Manual for BSA B series, p46, para 2.
New Zealand

Offline a10gf

  • Wise & Enlightened
  • *
  • Join Date: Sep 2006
  • Posts: 2802
  • Karma: 42
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: I.D. these plates please??
« Reply #6 on: 09.12. 2013 19:57 »
The Bender... no-one commented... it looks damn good, great work.

A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Offline gavinoz

  • A's Best Friend
  • ***
  • Join Date: Apr 2012
  • Posts: 140
  • Karma: 3
  • Dogs & Sheep hate smokers worse than Hondas.
Re: I.D. these plates please??
« Reply #7 on: 10.12. 2013 19:11 »
It does look really great RR. Where does the oil live? gav
Rigid A7S, 57 A10 in pieces
Australia

Offline Rocket Racer

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 1430
  • Karma: 16
  • A kiwi with a racing A10 rig and too many projects
    • NZ Classic Sidecar Racing
Re: I.D. these plates please??
« Reply #8 on: 10.12. 2013 19:30 »
so this isnt about me  ;) have attached an image of the late Kenny Eggers on his team wrecking crew, Daytona BSA for 1954, which my bike is based on a replica of.  (but with 16" wheels and a sidecar  *whistle*
The daytona bikes (which absolutely cleaned up in '54  *smile* ) used a converted toolbox as an oiltank. Its very neat and keeps the weight low, while also retaining the rigid plunger style.
I got a replica toolbox and modified it to suit.

http://www.youtube.com/watch?v=-IUbIdw_4j8
A good rider periodically checks all nuts and bolts with a spanner to see that they are tight - Instruction Manual for BSA B series, p46, para 2.
New Zealand