« previous next »
Pages: [1]   Go Down

Author Topic: K2F Magneto Pickup  (Read 551 times)

Offline Terryb

  • A's Good Friend
  • ***
  • Join Date: Feb 2014
  • Posts: 128
  • Karma: 1
K2F Magneto Pickup
« on: 06.03. 2014 19:53 »
Can anybody tell me how to secure the HT Pickup Mouldings. I have one that is secure and another which can be spun round. I've tried to increase the tension to the leaf spring on the top of the pickup securing clips, but I'm loathed to bend them too much. Any tips?
Logged

Offline Flatboy 1950

  • A's Good Friend
  • ***
  • Join Date: Oct 2010
  • Posts: 110
  • Karma: 1
    • Flat Earth Spares
Re: K2F Magneto Pickup
« Reply #1 on: 06.03. 2014 20:18 »
The mouldings have a flat on one side , the mag has a flat machined at the bulge ... when these two flats mate , nothing can rotate very much .....
Logged

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3192
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: K2F Magneto Pickup
« Reply #2 on: 06.03. 2014 21:50 »
Quote
nothing can rotate very much
Yes, as described above, ain't your pickups straight on one side \ secured by the ridge?
Or using a different mag body \ type of pickup?
Logged


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Offline Terryb

  • A's Good Friend
  • ***
  • Join Date: Feb 2014
  • Posts: 128
  • Karma: 1
Re: K2F Magneto Pickup
« Reply #3 on: 07.03. 2014 18:03 »
Sorted Guy's.

I found that the rivet which holds the spring leaves onto the pickup security clip, needed to be tightened. All I needed to do is tap it with a centre punch gently and she became instantly tight. The HT pickup is now secure. Thanks guy's. *smile*
Logged
Pages: [1]   Go Up
« previous next »