Author Topic: slack chain  (Read 553 times)

Offline derek taylor

  • A's Good Friend
  • ***
  • Join Date: Mar 2014
  • Posts: 134
  • Karma: 2
  • 1959 golden flash
slack chain
« on: 31.03. 2014 20:08 »
there seams to be a lot of slack on my drive chain can someone please tell me how much slack i should be looking at thanx

Offline muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 10758
  • Karma: 130
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: slack chain
« Reply #1 on: 31.03. 2014 20:45 »
G'day Derek.
I give mine about 3/4"-1". The best way is to have a heavy mate sit on it so the s/a pivot is in line with the sprockets and adjust to about 3/8".
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Offline Beezageezauk

  • N.E. England
  • Resident Legend
  • *****
  • Join Date: Mar 2006
  • Posts: 669
  • Karma: 21
Re: slack chain
« Reply #2 on: 31.03. 2014 20:54 »
Derek,

I agree with Muskrat....aim for about 3/4" when weighted.  But rotate your back wheel and check for any tight spots in the chain.  Then adjust when it's at its tightest spot.

Beezageezauk.

Offline derek taylor

  • A's Good Friend
  • ***
  • Join Date: Mar 2014
  • Posts: 134
  • Karma: 2
  • 1959 golden flash
Re: slack chain
« Reply #3 on: 01.04. 2014 07:00 »
cheers

Offline BSA_54A10

  • Wise & Enlightened
  • *
  • Join Date: May 2008
  • Posts: 2544
  • Karma: 37
    • BSA National
Re: slack chain
« Reply #4 on: 05.04. 2014 18:47 »
A tie down from the swing arm over the seat to the other side makes a good substitute for the "mates weight" and had 2 benefits.
1) does not decide to scratch it's bum every time you are about to measure
2) does not expect a shot of your good scotch when finished
Bike Beesa
Trevor