Author Topic: Crankshaft Sleeving  (Read 1545 times)

Offline bikerbob

  • Resident Legend
  • *****
  • Join Date: Feb 2011
  • Posts: 517
  • Karma: 7
Crankshaft Sleeving
« on: 29.05. 2014 12:32 »
Been to look at an A7 and am considering it, has a few issues couple of bad oil leaks not charging but the thing that concerns me the most is it had a major break down about a year ago and the present owner gave it to a professional repairer to fix. On stripdown the repairer found that a previous owner had fitted a sleeve over the crankshaft timing side and this sleeve had turned thus causing the problems. I asked the present owner what was done he said it had new bearings fitted and a new camshaft fitted but the bores and pistons were perfectly Ok. He has since done about 500 miles on the bike no problems. I asked what was done about the crankshaft but he did not know he said he has always used this engineer to do work on all of his bikes and his work has always been good he just lets him fix whatever  needs doing. He said that at present he is doing a Norton engine for him it seems he just takes the bikes to him and lets him fix whatever needs doing. The bike itself is 100% original never been restored all chrome and paintwork original nice patina, I did say as regards the charging which he blames the Lucas voltage regulator for he could fit a new solid state one  but he gave me a strange look and said  well if I did that it would not be original. The bike is swinging arm model with 72000 miles on the clock and has had 6 previous owners So what about this sleeve on the crankshaft never heard of any one doing that before.

Offline Briz

  • A's Best Friend
  • ***
  • Join Date: Apr 2013
  • Posts: 209
  • Karma: 7
  • West Norfolk UK
    • Custom cycle developments
Re: Crankshaft Sleeving
« Reply #1 on: 29.05. 2014 12:56 »
Well it should work if its done properly. Never heard of it being done before though.
Doesn't that sleeve make it non-original too? *smile*
Easy enough to find another A7 crank I would have thought.
I have to admit I never really got the 'originality' thing when it comes to things that wouldn't be noticed. You could hide an electronic regulator inside an original one if you wanted, although lack of airflow over it might be an issue.

Offline Topdad

  • bob hebdon
  • Wise & Enlightened
  • *
  • Join Date: May 2011
  • Posts: 2215
  • Karma: 32
  • l
Re: Crankshaft Sleeving
« Reply #2 on: 29.05. 2014 13:42 »
For my tuppence worth I say you still need abit more info with at least a phone call to the guy who did this sleeve. I'll bow to Britz is superior knowledge of engineering  over mine but only 500 miles on the clock so bearly run in, unusual work done by unknown engineer ? and you're probably paying top dollar . I'd ask for contact details of the work and the name of the company/guy who did it and post them here .Someone will know of them and you'll but your mind at ease also could be of help for  us all. At least he told you about it ,which is a good start , lets know how you get on regards Bob.
" rules are made for the guidance of wise men and the blind obediance of fools"
United Kingdom

Offline bikerbob

  • Resident Legend
  • *****
  • Join Date: Feb 2011
  • Posts: 517
  • Karma: 7
Re: Crankshaft Sleeving
« Reply #3 on: 29.05. 2014 14:30 »
I think the repairers name is Bob Wardle I have heard of him before and have only heard good things about him I think he has his own machine shop and he does end feed conversions etc. I have no doubt that if he done the work it would done correctly but it is just something I have never heard of and am wondering how it was resolved.

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8021
  • Karma: 106
  • Lake Conjola NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Crankshaft Sleeving
« Reply #4 on: 29.05. 2014 14:51 »
The only way to resolve it would be to make a bush to suit. The shaft might be getting a bit small if the groove was machined off for the sleeve to fit. If it was me I'd like to take the timing cover, oil pump and pinion off to see the size of the journal.
Cheers
'51 A7 plunger, '57 A7SS now A10CR, '76 XT500, '77 AG175 '83 CB1100F, '81 CB900F project.
Australia
Muskys Plunger A7

Offline Topdad

  • bob hebdon
  • Wise & Enlightened
  • *
  • Join Date: May 2011
  • Posts: 2215
  • Karma: 32
  • l
Re: Crankshaft Sleeving
« Reply #5 on: 29.05. 2014 14:55 »
I've heard of that guy and only good things!  hsn't he posted on the forum before now or was it a friend who commenting on his work  but this could get interesting ,BobH
" rules are made for the guidance of wise men and the blind obediance of fools"
United Kingdom

Online duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4510
  • Karma: 40
Re: Crankshaft Sleeving
« Reply #6 on: 30.05. 2014 08:18 »

 Sounds like a very strange thing to do.... *conf*..but thanks for the reminder-
 after I read most, was thinking drive side, as I had to do this to mine when I first started on it late '70s...
someone posted a while ago about building up the D/S journal, but I had forgotten about mine until after that when I needed to pull the bearing to redo the shims and the sleeve came along for the ride *eek*, and I've been meaning to mention it but keep to forget...

Quote
.... but he gave me a strange look and said....
......don't yea hate that...? *bash*(I'm not really a violent type-except !)
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia

Offline BSARGS650

  • Moving Up
  • **
  • Join Date: May 2014
  • Posts: 81
  • Karma: 0
Re: Crankshaft Sleeving
« Reply #7 on: 30.05. 2014 10:24 »
Back in 1985, SRM in Penarth, near Cardiff, Wales - Steve Macfarlane the boss (sorry Steve if I have missspell your surname) offered a hardened sleeved crank with larger timing bush which increased loading by 25% - I have the details somewhere.  I had this done on my RGS back then and had no problem revving the guts out of it.  Nothing came loose or exploded - yet!

Offline BSARGS650

  • Moving Up
  • **
  • Join Date: May 2014
  • Posts: 81
  • Karma: 0
Re: Crankshaft Sleeving
« Reply #8 on: 30.05. 2014 10:35 »
Sorry, a bit nervous as a newby!

I meant to have said - SRM fitted a hardened sleeve to the customers crankshaft, a larger timing bush in the crankhalf, reamed true.

Nowadays it is the roller bearing /end feed job.  I had this done to my SR by SRM in Aberystwyth - a good bunch of lads....

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8021
  • Karma: 106
  • Lake Conjola NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Crankshaft Sleeving
« Reply #9 on: 30.05. 2014 10:56 »
The reason for my scepticism is that a shaft that has been sleeved should not be any stronger than std as the weak point is still the original radius of shaft and web. If the shaft has been turned down and sleeved it would be weaker. I may be wrong as I was only a fitter & turner, not an engineer.
I saying all that I have broken a few cranks but always at the big end journal not the main shaft.
Cheers
'51 A7 plunger, '57 A7SS now A10CR, '76 XT500, '77 AG175 '83 CB1100F, '81 CB900F project.
Australia
Muskys Plunger A7

Offline BSARGS650

  • Moving Up
  • **
  • Join Date: May 2014
  • Posts: 81
  • Karma: 0
Re: Crankshaft Sleeving
« Reply #10 on: 30.05. 2014 11:10 »
Hi Muskrat - thanks for the welcome!

If my grey cells are not afflicted by forces in the cosmos today - no reduction in diameter to crank prior to sleeve fitted.

Offline Dynamo Regulators Mike

  • A's Best Friend
  • ***
  • Join Date: Apr 2008
  • Posts: 165
  • Karma: 6
  • Fareham, UK, 1960 A10
    • Dynamo Regulators Ltd
Re: Crankshaft Sleeving
« Reply #11 on: 30.05. 2014 12:50 »
Yes. My Flash has this original Steve McFarlane SRM sleeve and solid bush mod. At the time he was not doing the little roller/ball bearing timing side job on pre units, if I remember correctly. Only of real benefit on very highly loaded engines, Spitfire type of effort. Cheaper too naturally enough.

The aim is to provide more ideal bearing combination to slow wear rate. Bronze bush on softer shaft can have wear problems. Mine was ok many thousands of miles and a good many years on, last time I looked. Oil filter helps a lot as well of course.

AFAIK the strength of the shaft timing end was never an issue.
Mike Hutchings
A10, B50, T800; 1,2,3 (& DVR2)
Director, DRL www.dynamoregulators.com

Offline bikerbob

  • Resident Legend
  • *****
  • Join Date: Feb 2011
  • Posts: 517
  • Karma: 7
Re: Crankshaft Sleeving
« Reply #12 on: 31.05. 2014 10:44 »
Been trying to contact Rob Wardle but the phone is not answering maybe on holiday. But I have been looking at a small journal crank and the drive side shaft is a lot smaller than the timing side so maybe if the timing side has been machined no smaller than the drive side prior to sleeving it would be Ok as I would have thought most strain would be on the drive side, also maybe BSA made the timing side bigger to have a decent size bush. Your Thoughts. I am tempted to go for this bike because of it,s unrestored  originality.

Offline wardleybob

  • A's Best Friend
  • ***
  • Join Date: Oct 2012
  • Posts: 109
  • Karma: 3
Re: Crankshaft Sleeving
« Reply #13 on: 02.06. 2014 21:36 »
Hi this is wardley bob I rebuilt the engine on the a7. If you pm me I will fill you in on the details bob.

Offline bikerbob

  • Resident Legend
  • *****
  • Join Date: Feb 2011
  • Posts: 517
  • Karma: 7
Re: Crankshaft Sleeving
« Reply #14 on: 04.06. 2014 15:28 »
Thanks to all those who replied, I have spoken to Bob Wardle who informs me that the crankshaft was not sleeved what had happened was the previous owner had fitted a new timing side bush  and the inner bronze sleeve had turned inside the outer steel casing causing major problems which he has rectified. Bob Wardle is a really nice helpful guy and I appreciate him contacting me to let me know the correct history. Thanks again for the responses.