Author Topic: A10 S/A gearbox  (Read 501 times)

Offline saladboy55

  • Active
  • *
  • Join Date: May 2014
  • Posts: 3
  • Karma: 0
A10 S/A gearbox
« on: 28.06. 2014 19:48 »
Hi everyone just rebuilt my gearbox 1959 s/a a10 , New bearings bushes throughout all marks line up goes into gear with out the outer casing on all though it seem a bit stiff ,but when i put the outer cover on it will go into first and then thats it no gears or neutral , any ideas ? thanks . 
Good Advice
0
No reactions

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5536
  • Karma: 65
Re: A10 S/A gearbox
« Reply #1 on: 28.06. 2014 20:01 »
with the outer cover on try just slackening the screws and nuts a little at a time, I had to put two gaskets on mine to get all four gears
Good Advice
0
No reactions
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline saladboy55

  • Active
  • *
  • Join Date: May 2014
  • Posts: 3
  • Karma: 0
Re: A10 S/A gearbox
« Reply #2 on: 28.06. 2014 22:14 »
Thanks Bill *smiley4*
Good Advice
0
No reactions