Author Topic: Ultrasonic bath - who has experience?  (Read 350 times)


  • Guest
Ultrasonic bath - who has experience?
« on: 17.06. 2015 18:35 »
Hi Folks, Just taken delivery of an ultrasonic bath. Hoping to use it for carbs and parts generally. As usual the instructions are useless (unless you have absolutely no common sense at all). I was interested to learn that it is not advisable to handle the plug with wet hands nor should I bath the family gerbil in my new ultrasonic pond, nor should I dismantle the product if it doesn't work properly. Makes me wonder how I have managed to live so long. But........ if you have experience of using one of these things please let me know a) what temperature you run it at, b) for how long and c) what fluid would you recommend. I'm sure the information is out there in cyberspace but it would help if somebody with experience could chip in. Ta

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5716
  • Karma: 66
Re: Ultrasonic bath - who has experience?
« Reply #1 on: 17.06. 2015 19:31 »
mine is one of Aldi's so designed I think for household stuff, used it once with a carb body, did shift some stuff, no temperature control (is it needed) and just uses water.
Haven't seen it since the carb came out of it but understand it clean jewellery very well *doh*
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline Butch (cb)

  • Wise & Enlightened
  • *
  • Join Date: Aug 2010
  • Posts: 1664
  • Karma: 16
Re: Ultrasonic bath - who has experience?
« Reply #2 on: 18.06. 2015 17:06 »
Don't sniff at the Trichlorethylene either. But if you do, don't combine it with smoking.
Warning - observations made by this member have a 93% unreliability rating.

Of Bikes; various, including ...
'58 S/Arm Iron Head Flash Bitza

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8911
  • Karma: 113
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Ultrasonic bath - who has experience?
« Reply #3 on: 18.06. 2015 19:30 »
A friend did two carbs for me using warm water and dishwashing liquid. Did a good job, one carb was chock a block with gum.
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Muskys Plunger A7

Online RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 5585
  • Karma: 52
Re: Ultrasonic bath - who has experience?
« Reply #4 on: 18.06. 2015 21:24 »
I always thought the idea of ultrasonic cleaners was to use water to do the job instead of solvents, but really have no experience.

Richard L.
Plan on signing up for the world-wide 2020 DISTINGUISHED GENTLEMAN'S RIDEon September 27, 2020. This year it's a solo or pillion ride in dapper attire. Watch website at for details.

Offline jachenbach

  • Resident Legend
  • *****
  • Join Date: Feb 2014
  • Posts: 564
  • Karma: 8
Re: Ultrasonic bath - who has experience?
« Reply #5 on: 19.06. 2015 03:53 »
Back in my engineering days, I used ultrasonics with a lot of really nasty stuff. Haven't used them for carbs in particular, but see no reason for an elevated temperature. Room temp with lacquer thinner works great on fuel injectors. Actually, just soaking in lacquer thinner works wonders. I see no reason it wouldn't work just as well on carbs.