Author Topic: axle end float  (Read 258 times)

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5415
  • Karma: 61
axle end float
« on: 02.10. 2014 17:31 »
seems a long time since I built up a (cast full width) front hub but can't recall if this is correct.
I have about 3 to 4 mm movement on the axle (end float), I know there should be a spacer of sorts in there, thought I'd ask before pulling it down.
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco