« previous next »
Pages: [1]   Go Down

Author Topic: Wheel Offset  (Read 534 times)

Online Terryb

  • A's Good Friend
  • ***
  • Join Date: Feb 2014
  • Posts: 128
  • Karma: 1
Wheel Offset
« on: 28.12. 2014 19:09 »
Can anybody confirm that the offset of 9/16" is correct for a front wheel 19" WM2 rim with a half width 8" hub? Thanks.  *conf*

Terryb
Logged

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5720
  • Karma: 66
Re: Wheel Offset
« Reply #1 on: 28.12. 2014 19:22 »
if that's what it takes to get it central between the forks
Logged
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Online morris

  • Wise & Enlightened
  • *
  • Join Date: Aug 2012
  • Posts: 1767
  • Karma: 27
  • Antwerp, Belgium
Re: Wheel Offset
« Reply #2 on: 29.12. 2014 20:08 »
When I dismantled my half width plunger's front wheel I measured 17mm all around with the brake side flat on the bench.
Corresponds to a little under 11/16
Logged
'58 BSA A 10 SA
'52 BSA A 10 Plunger
'55 MORRIS ISIS
The world looks better from a motorbike
Belgium

Online Terryb

  • A's Good Friend
  • ***
  • Join Date: Feb 2014
  • Posts: 128
  • Karma: 1
Re: Wheel Offset
« Reply #3 on: 31.12. 2014 17:28 »
Hi All,

Thanks for the information, I achieved just over 15mm from the brake flange and it sitting nicely central between the forks. Now for the rear one.

Cheers Happy New Year
Terryb
Logged
Pages: [1]   Go Up
« previous next »