Author Topic: friction plates  (Read 351 times)

Offline Marqs1979

  • A's Best Friend
  • ***
  • Join Date: Sep 2013
  • Posts: 109
  • Karma: 0
friction plates
« on: 19.01. 2015 19:48 »
Hello, is it ok to use different types of friction plates in the clutch?
Good Advice
0
No reactions

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8442
  • Karma: 111
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: friction plates
« Reply #1 on: 19.01. 2015 20:35 »
G'day Marqs.
The short answer is yes.
The long answer is yes but. I would shy away from the alloy type, the tangs wear quicker than the steel ones and when hot expand more and can cause clutch drag.
Cheers
Good Advice
0
No reactions
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7