Author Topic: Brake / clutch lever needed  (Read 581 times)

Offline Russ

  • A's Good Friend
  • ***
  • Join Date: Aug 2009
  • Posts: 247
  • Karma: 1
Brake / clutch lever needed
« on: 24.01. 2015 00:39 »
I would like to buy / swap /sell a lever to match one of the two that I have to give me a pair. My two levers came with my 51 A10 project but as shown in the attached photo's they are not identical. They are for 7/8th handle bars. I believe they are original levers of the period but would appreciate conformation of this if you can tell from the photo's.
The left hand lever is marked,(as best I can tell) PD No 8432 but neither has any other brand. What type / brand are they? They both carry some wear / damage marks which I hope is clear in the photo's.

Thanks Russ
1951 A10 Plunger.
Australia

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3184
  • Karma: 71
Re: Brake / clutch lever needed
« Reply #1 on: 24.01. 2015 20:47 »
They look like the originals, Russ.
Dip switch mounts on the left pad, horn button on the right. Tapped 5BA.
I will have a look at some I have here to see if the dimensions are the same.

Trev.

Offline trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3184
  • Karma: 71
Re: Brake / clutch lever needed
« Reply #2 on: 25.01. 2015 00:17 »
I had a look at my stock of levers, Russ.
Most were 28mm wide, a couple were 35.

Trev.

Offline WozzA

  • Wise & Enlightened
  • *
  • Join Date: Nov 2011
  • Posts: 1480
  • Karma: 18
  • Melbourne Australia
Re: Brake / clutch lever needed
« Reply #3 on: 25.01. 2015 22:38 »
Yep...  their the original early ones... I gave away a set recently..
& a set in not as good nick as yours just sold on eBay for $46 Kangaroos  ...
their getting HARD to come by... 
'51 Golden Flash Plunger
'57 Golden Flash Swingarm

Melbourne
The biggest lie I tell myself is
"I don't need to write that down, I'll remember it"