My A10 magneto is shot so I have gone the 12v, electronic ignition route (Thorspark, DVR2 and AGM battery).
Most of bits removed and at the point of installing new electronics. First issue is where to locate the coil! Installation info suggests under the tank but there doesn't seem to be enough room there. 2nd suggestion is under the seat but then the HT leads aren't long enough.
I think I saw photos a while ago of a coil in place but I have searched on the forum and can't find it now.
Has anyone done this conversion and have pictures or know where to get picture of coil in situ?
I am also going to upgrade the battery earth wire. Any suggestions for cable size?
Many thanks