A7 1952 plunger stop/tail light type?

[larryc]

I am almost ready for a re-wire on my 52 A7 plunger and would like to fit the correct stop tail lamp, It will be one of the repro's offered on the net. The bike came with a Wipac S446 which I think is off a bantam, registration plate fitting is the 'open' type and the original holes for the lamp fitting are circular (6) around the circular hole for the wiring.
I have looked at loads of photo's for a 52 plunger and the majority seem to be the Mt110 or the MT211. Has anyone any idea which I should fit to keep the bike looking as original as possible with a repro?
I will appreciate any suggestions, cheers, Larrry.

[muskrat]

G'day Larrry 
Have a look here  https://www.draganfly.co.uk/index.php/bsa/bsa/category/1015-tail-lamps
I have an MT211 on my '51 A7 plunger.
Cheers

[larryc]

G'day Larrry 
Have a look here  https://www.draganfly.co.uk/index.php/bsa/bsa/category/1015-tail-lamps
I have an MT211 on my '51 A7 plunger.
Cheers

Thanks Muskrat, that is a great help, Larry.

[morris]

Hi Larry, a really good source for all parts electric is Paul Goff's website;

http://www.norbsa02.freeuk.com/index.htm

Rear lights on this page;

http://www.norbsa02.freeuk.com/goffylighting.htm

[larryc]

Thanks Morris, a good site, reasonable prices too!

[beezermacc]

Also worth a look. https://sites.google.com/site/priorymagnetos/other-electrical-spares

[larryc]

Thanks, another good source, reasonable prices too! cheers pal. Larry