Author Topic: cannot kick over with plugs in.  (Read 997 times)

Offline coater87

  • Wise & Enlightened
  • *
  • Join Date: Jul 2008
  • Posts: 1181
  • Karma: 6
cannot kick over with plugs in.
« on: 01.07. 2015 02:00 »
 

 I remember a thread where this was the problem, the bike could not be kicked over with the spark plugs installed, but when removed it could be. I got a spare gearbox some years back, and that was the reason that bike was parted out- they could not figure out what was wrong with the motor.

 But I thought this was a gearbox problem, but I cannot remember what the problem was.

 Anybody know the cause of this?
Central Wisconsin in the U.S.

Offline WozzA

  • Wise & Enlightened
  • *
  • Join Date: Nov 2011
  • Posts: 1321
  • Karma: 17
  • Melbourne Australia
Re: cannot kick over with plugs in.
« Reply #1 on: 01.07. 2015 05:13 »
not enough Weeties?   *whistle*
'51 Golden Flash Plunger
'57 Golden Flash Swingarm

Melbourne
The biggest lie I tell myself is
"I don't need to write that down, I'll remember it"

Online Klaus

  • Valued Contributor
  • ****
  • Join Date: Jun 2015
  • Posts: 382
  • Karma: 10
Re: cannot kick over with plugs in.
« Reply #2 on: 01.07. 2015 07:10 »
Hi coater,

you can sort it out.
Cut off the primarychain and try to turn over the crank with a wrench. If it runs, the problem is at the gearbox.
In this case I reckon the layshaftbushes are wasted.

Klaus


If you think, everything is under control, you are not fast enought.

Online Butch (cb)

  • Wise & Enlightened
  • *
  • Join Date: Aug 2010
  • Posts: 1574
  • Karma: 15
Re: cannot kick over with plugs in.
« Reply #3 on: 01.07. 2015 08:41 »
I don't see a clear correlation between the spark plugs being installed and a gearbox fault manifesting itself.

So I'd go with one of the two preceding responses.
Warning - observations made by this member have a 93% unreliability rating.

Of Bikes; various, including ...
'58 Iron Head Flash Bitza


Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5563
  • Karma: 65
Re: cannot kick over with plugs in.
« Reply #4 on: 01.07. 2015 09:00 »
not to sure of the ground I'm on here but is it possible for a long reach plug to foul a piston in an iron head with high comp pistons, non of which probably count but worth a shout first thing in the morning
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline unclerob

  • A's Best Friend
  • ***
  • Join Date: Jul 2012
  • Posts: 214
  • Karma: 6
Re: cannot kick over with plugs in.
« Reply #5 on: 01.07. 2015 10:00 »
Sometimes the kickstart gears tend to jam and it might just feel like the engine won't turn.....does the kickstart work with the clutch pulled in?

Offline coater87

  • Wise & Enlightened
  • *
  • Join Date: Jul 2008
  • Posts: 1181
  • Karma: 6
Re: cannot kick over with plugs in.
« Reply #6 on: 01.07. 2015 10:55 »
 The box is currently out and has been for some years now, but it is time to open it up. I am still getting the cases ready for vapor blasting, and the gearbox casings are going also.

 Maybe it was the layshaft bushing, I just cannot recall.

 The idea I believe at the time was the added stress the compression added caused a miss alignment somewhere and made it impossible to kick. Once the compression was off it would go over.

  But regardless, the whole thing is coming apart and hopefully the problem will be easy to spot.

 Thanks guys!
Central Wisconsin in the U.S.

Offline coater87

  • Wise & Enlightened
  • *
  • Join Date: Jul 2008
  • Posts: 1181
  • Karma: 6
Re: cannot kick over with plugs in.
« Reply #7 on: 02.07. 2015 18:54 »
mystery pretty much solved:

 bushings completely shot, layshaft badly worn. Box put together incorrectly, camplate worn. One extra bolt floating around inside box. *sad2*

 Is there anywhere that sells new gears for the a10? I need some.....
Central Wisconsin in the U.S.

Online RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 5266
  • Karma: 50
Re: cannot kick over with plugs in.
« Reply #8 on: 02.07. 2015 20:22 »
Oh, that's all?  *smile*
Plan on signing up for the world-wide 2020 DISTINGUISHED GENTLEMAN'S RIDEon September 27, 2020. This year it's a solo or pillion ride in dapper attire. Watch website at https://www.gentlemansride.com for details.


Offline edboy

  • Valued Contributor
  • ****
  • Join Date: Oct 2012
  • Posts: 482
  • Karma: 5
Re: cannot kick over with plugs in.
« Reply #9 on: 02.07. 2015 20:48 »
coater, bad luck with the worn box  but you can buy brand new 5 speed boxes over here which the race boys use. not cheap though.

Offline coater87

  • Wise & Enlightened
  • *
  • Join Date: Jul 2008
  • Posts: 1181
  • Karma: 6
Re: cannot kick over with plugs in.
« Reply #10 on: 03.07. 2015 00:52 »
 I am pretty much the opposite of the race guys. I just like things to run correctly, be it one of my old cars or the washing machine.

 Oh and I forgot to mention, the single screw holding the inner cover on was replaced with one of those all important wood screws. I think the PO believed those were direct factory replacements. *conf*
Central Wisconsin in the U.S.

Offline bikerbob

  • Resident Legend
  • *****
  • Join Date: Feb 2011
  • Posts: 564
  • Karma: 7
Re: cannot kick over with plugs in.
« Reply #11 on: 03.07. 2015 09:43 »
 You could pick up a decent second hand gearbox on ebay probably much cheaper than trying to find someone who can supply new gears I should imagine new gears will be quite expensive. Try typing the following numbers into ebay  and you will get an idea of the second hand costs.  36133292355      351440135862   If I was in your position I would be going for a second hand box  there are always some on ebay.

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 8505
  • Karma: 112
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: cannot kick over with plugs in.
« Reply #12 on: 03.07. 2015 10:26 »
I'd be looking for a complete box as well. How many gears are we looking at? Look up part #'s and I'd check here 1st. http://www.goldstarbsa.com/Plate_3.asp
They were very helpful to me years back.
Cheers
'51 A7 plunger, '57 A7SS now A10CR,  '83 CB1100F, 88 FXST .
Australia
Muskys Plunger A7

Offline coater87

  • Wise & Enlightened
  • *
  • Join Date: Jul 2008
  • Posts: 1181
  • Karma: 6
Re: cannot kick over with plugs in.
« Reply #13 on: 03.07. 2015 13:38 »
 If there is not a ready supplier on the aftermarket (still need to contact the site you sent me to Musky- they scare me a bit right off with the Goldstar and Scrambles parts but we will see).

 I guess its new bushings and shaft grinds and maybe some gear shaves. I will combine the best parts from two boxes and any other parts I have around.  It may be a bit crunchy, but maybe with a careful build and better clutch option it will be all right.

 In the mean time I will look for a  better box or two.
Central Wisconsin in the U.S.

Offline duTch

  • Ricketty Rocketty Golden Flashback
  • Wise & Enlightened
  • *
  • Join Date: Oct 2011
  • Posts: 4540
  • Karma: 41
Re: cannot kick over with plugs in.
« Reply #14 on: 03.07. 2015 15:47 »

 
 Fairly sure it was DraganFly I saw some listed a while ago (last year)...don't get your hopes up, but I just had a look and they have some listed, some made to order, some not available but reasonable prices- cheaper than the ones I just bought from Germany for my Gutzzi...the reality may be different

 

 https://www.draganfly.co.uk/index.php/bsa/bsa/a710--b3133--c101112--m202133/category/1097-rigid-plunger-a-group-s-arm-a-b-group-and-all-4-speed-c-group
Started building in about 1977/8 a on average '52 A10 -built from bits 'n pieces never resto intended -maybe 'personalised'
Have a '74 850T Moto Guzzi since '92-best thing I ever bought doesn't need a kickstart 'cos it bump starts sooooooooo(mostly) easy
Australia