Author Topic: Engine bolts  (Read 283 times)

Online WozzA

  • Wise & Enlightened
  • *
  • Join Date: Nov 2011
  • Posts: 1319
  • Karma: 17
  • Melbourne Australia
Engine bolts
« on: 07.07. 2015 07:37 »
a mate has asked me to help restoration of his '51 plunger...
it has a bent frame & the motor is out... requiring to be put on a jig.
people doing the straightening want the motor in, & he does not have the engine bolts..
my question is...  *????*  are both swing arm & plunger frame bolt sets the same?
or should he obtain a special set...
Good Advice
0
No reactions
'51 Golden Flash Plunger
'57 Golden Flash Swingarm

Melbourne
The biggest lie I tell myself is
"I don't need to write that down, I'll remember it"

beezermacc

  • Guest
Re: Engine bolts
« Reply #1 on: 07.07. 2015 07:48 »
Sorry, completely different apart from some similarities around the dynamo plates. Use threaded bar as a temporary fix.
Good Advice
0
No reactions

Online WozzA

  • Wise & Enlightened
  • *
  • Join Date: Nov 2011
  • Posts: 1319
  • Karma: 17
  • Melbourne Australia
Re: Engine bolts
« Reply #2 on: 07.07. 2015 13:33 »
Thank you...   good idea re the threaded bars...   *wink2*
Good Advice
0
No reactions
'51 Golden Flash Plunger
'57 Golden Flash Swingarm

Melbourne
The biggest lie I tell myself is
"I don't need to write that down, I'll remember it"